1. Power Saw Blades Offers
  2. sku: 18800365265523731
  3. RIDGE CARBIDE RS11210NF-5/8

RIDGE CARBIDE RS11210NF-5-8 Ferrous Saw Blade Tcg Grind 850072398402 RS11210NF-5/8

Rs11210nf-5 Ridge Carbide Rs11210nf-5/8 12 Inch Non-ferrous Saw Blade 100 Teeth Tcg Grind -5 5/8

( Brand: Ridge Carbide ), ( Manufacturer Part Number: RS11210NF-5/8 ), ( Part Type: Blade Saw ), ( UPC: 850072398402 )

Review RIDGE CARBIDE Rs11210nf-5/8 Inch Non ferrous Saw Blade 100 Teeth Tcg Grind 5/8

The **Ridge Carbide RS11210NF-5/8 12 Non-Ferrous Saw Blade (TCG Grind, 5/8")** is a high-performance cutting tool meticulously engineered for precision and durability when tackling non-ferrous metals, aluminum, and other soft alloys. Designed with a **12-inch diameter**, this blade strikes an ideal balance between versatility and efficiency, making it perfect for both professional machinists and serious hobbyists who demand consistent, clean cuts without excessive material waste. The **TCG (Triple Chip Grind)** tooth geometry is a standout feature, featuring three distinct cutting edges per tooth that work in unison to reduce heat buildup, minimize tear-out, and enhance chip evacuation. This advanced grind significantly extends blade life while delivering smoother finishes, even at higher feed rates, which is particularly advantageous when working with materials prone to heat distortion or when maximizing productivity is a priority.

Constructed from **high-speed steel (HSS) with carbide-tipped teeth**, this blade combines the toughness of steel with the wear resistance of carbide, ensuring exceptional longevity even when cutting through abrasive or gummy non-ferrous alloys. The **non-ferrous-specific carbide tips** are optimized to resist galling and adhesion, preventing the blade from seizing up or leaving rough, burr-filled edges a common issue when using standard blades on softer metals. The **5/8-inch arbor hole** accommodates a wide range of industrial and bench-top saws, from heavy-duty radial armsaws to compact band saws, while the **100 teeth per inch (TPI)** tooth spacing strikes a precise middle ground, offering a fine enough cut for detailed work while still maintaining robust material removal rates. This tooth density also reduces the risk of clogging, making the blade well-suited for applications like aluminum extrusion, brass, copper, and even certain plastics or composites.

Built to withstand the rigors of demanding environments, the RS11210NF is **hardened and tempered** to resist deformation and maintain sharpness over extended use, reducing the need for frequent resharpening or replacement. The blade s **ridge design** further enhances stability during cuts, reducing vibration and improving accuracy critical factors when working on thin-walled or delicate components where even minor deviations can compromise structural integrity. Whether you re milling intricate parts for automotive, aerospace, or electronics applications, or simply tackling a variety of non-ferrous projects in a workshop setting, this blade delivers the reliability and precision required to meet tight tolerances. Its robust construction and specialized tooth geometry make it a cost-effective investment, as it consistently outperforms conventional blades in terms of both performance and longevity, ultimately saving time and material costs in the long run.

The **Ridge Carbide RS11210NF-5/8 12" Non-Ferrous Saw Blade (TCG Grind, 5/8" Arbor)** is a popular choice for cutting non-ferrous metals like aluminum, copper, brass, and other soft alloys. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **High-Quality Carbide Teeth**

The blade features **Ridge Carbide** teeth, which are known for their durability and resistance to wear. Carbide teeth last significantly longer than high-speed steel (HSS) or bi-metal blades, reducing the need for frequent replacements. This makes it cost-effective over time, especially for heavy-duty or frequent use.

2. **TCG (Triple Chip Grind) Design**

The **TCG grind pattern** provides a smoother cut with less vibration and heat buildup compared to traditional grind patterns. This results in cleaner cuts, less material deformation, and a longer blade life. It s particularly effective for non-ferrous metals, which can be prone to melting or burning with excessive friction.

3. **Non-Ferrous Optimization**

The blade is specifically designed for **non-ferrous metals**, meaning the tooth geometry and coating are tailored to prevent sticking, seizing, or excessive heat generation. This is critical when cutting aluminum or other soft metals, which can gum up or damage standard blades.

4. **Versatility**

The **12" length** makes it suitable for a wide range of materials and thicknesses, from thin sheets to moderately thick non-ferrous stock. The **5/8" arbor size** is standard for most industrial band saws and metal-cutting saws, ensuring compatibility with many machines.

5. **Low Heat Generation**

Because the blade is designed for non-ferrous metals, it generates less heat during cutting, reducing the risk of warping or thermal damage to the workpiece. This is especially important for precision work or when cutting thin materials.

6. **Smooth Finish**

The TCG grind and carbide teeth contribute to a **cleaner cut surface**, minimizing the need for additional finishing work. This is beneficial for applications where surface quality matters, such as in fabrication or prototyping.

7. **Long Tool Life**

Due to the carbide construction and optimized grind, this blade can outlast many bi-metal or HSS alternatives, even when cutting through tougher non-ferrous alloys. This reduces downtime for blade changes and improves productivity.

8. **Compatibility with Most Machines**

The **5/8" arbor** is widely supported, making this blade adaptable to various band saws, radial arm saws, and metal-cutting saws without requiring special adapters.

---

### **Cons**

1. **Higher Upfront Cost**

Carbide blades, especially those with specialized grinds like TCG, are **more expensive** than standard bi-metal or HSS blades. While they last longer, the initial purchase price may be a barrier for casual users or those on a tight budget.

2. **Not Suitable for Ferrous Metals**

This blade is **explicitly designed for non-ferrous metals** and will perform poorly (or fail quickly) when cutting steel, cast iron, or other ferrous materials. Attempting to use it on ferrous metals can lead to rapid tooth wear, excessive heat, and blade breakage.

3. **Requires Proper Machine Setup**

To maximize performance, the blade must be installed on a **properly tensioned and aligned** saw. If the machine is not set up correctly (e.g., incorrect tension, misalignment, or improper guide settings), the blade may vibrate excessively, leading to premature wear or breakage.

4. **Limited Availability of Replacements**

While Ridge Carbide is a reputable brand, finding replacement blades may be more difficult than for more common brands. Stocking extra blades may be impractical for some users due to cost or storage constraints.

5. **Potential for Overuse on Thin Materials**

While the blade excels with non-ferrous metals, cutting **very thin sheets** (e.g., 0.020" or less) may still require caution. Excessive speed or improper feed rates can cause the blade to bind or tear the material. A slower feed and appropriate blade speed are recommended for thin cuts.

6. **Not Ideal for Abrasive or Contaminated Materials**

If the non-ferrous material contains **sand, paint, or other contaminants**, the blade may wear faster due to abrasive particles. Pre-cleaning the material can help mitigate this issue.

7. **Specialized Knowledge Required**

Users unfamiliar with carbide blades may need to adjust their cutting techniques. For example, non-ferrous metals can sometimes "gum up" the blade if not cut properly, requiring slower speeds or lubrication (e.g., cutting fluid) in some cases.

---

### **Conclusion**

The **Ridge Carbide RS11210NF-5/8 12" Non-Ferrous Saw Blade (TCG Grind)** is an **excellent choice** for professionals or serious hobbyists who frequently cut non-ferrous metals. Its **durability, clean cuts, and low heat generation** make it a reliable tool for precision work. However, its **higher cost and specialization** mean it may not be the best fit for occasional users or those working primarily with ferrous metals.

If you primarily cut **aluminum, copper, brass, or other soft alloys** and need a blade that lasts, performs consistently, and delivers a high-quality finish, this is a **strong recommendation**. For users who cut a mix of materials or work on a limited budget, a **bi-metal or HSS non-ferrous blade** might be a more practical starting point, though they will require more frequent replacements.

---

### **Recommendation**

**Buy this blade if:**

- You frequently cut **non-ferrous metals** (aluminum, copper, brass, etc.).

- You prioritize **long blade life, clean cuts, and minimal heat buildup**.

- You have a **band saw or metal-cutting saw** with a **5/8" arbor**.

- You are willing to invest in a **high-performance blade** that reduces downtime.

**Consider alternatives if:**

- You cut **mostly ferrous metals** (steel, cast iron) and need a versatile blade.

- You work on a **tight budget** and cannot afford the upfront cost.

- You primarily cut **very thin materials** (e.g., 0.010" or less) and are unsure about blade performance.

- You do not have access to **cutting fluid or lubrication** for optimal blade performance.

For most **serious non-ferrous cutting applications**, this blade is a **top-tier choice** and will pay for itself through extended use and superior results.

Details:

Ideal for cutting harder materials, such as man made laminates single sided and non-ferrous metals. Fully hardened, hand-pensioned and heavy tool steel bodies for optimal plate stability flatness that run true better cuts. Whether you're working with hardwood, softwood, or veneered panels, this blade delivers unmatched cut quality and overall performance. Grind Type: Triple Chip TCG - Tooth configuration consists of a trapezoidal tooth followed by Flat Top Ranker for clean out.

Recommended Material: non-ferrous metals Aluminum, Brass, Copper, Machines: Miter Saw, Radial Arm Applications: designed for use in a radial arm saws or miter saws, specifically cutting. Teeth that are 1/3 larger than other premium brands allowing up to 20-25 blade sharpening. Expansion slots for stability and noise reduction. Carbide teeth are ground to a 1200 grit micro finish for razor sharpness the produce clean and smooth cuts long life.

Can be used for ripping, but not recommended crosscutting natural wood.

part #: rs11210nf58 price

  • $232.67

specifications sawbladeother:

  • brand: Ridge Carbide
  • mpn: Rs11210nf-5/8
  • part type: Blade Saw
  • upc: 850072398402

general sawbladeother:

  • condition: New
  • Power Tool Air Tool Accessories > Saw Blades > Other Saw Blades

seller sawbladeother:

  • rating: 99.5%
  • city: Columbia, Missouri
  • # reviews: 88932

offer sawbladeother:

  • started: May 20, 2026
  • availability: In Stock
  • options: Ship-to-home
  • sold: 0

payments sawbladeother:

  • credit card: Visa
  • other
  • wallet: Apple-pay

shipping sawbladeother:

  • type: Fixed
  • cost: $0.00
  • transit: 2-7 Days
  • class: Standard
  • service: Standard

returns sawbladeother:

  • paid by: Buyer
  • method: Money back
  • policy: Returns Accepted
  • time: 30 Days
part type: blade saw,
category: home & garden > power tool air accessories > saw blades, sku: 18800365265523731,
Ridge Carbide RS11210NF-5-8 Is Similar To:
sawbladeother logo
1 offer $232.67 USD
  • New. Offer #1 priced at $232.67 + $0.00 shipping estimate = $232.67* total. Bore: 5/8". Grind: Triple Chip Grind (TCG).FREE SHIPPING

Copyright © sawbladeother.com