REED HDHS1875 Carbide Tipped Hole Saw Cutter 757033043565 1-7/8

( Brand: Reed ), ( Manufacturer Part Number: HDHS1875 ), ( Type: Hole Saw ), ( UPC: 757033043565 )

Review REED Heavy Duty Carbide tipped Hole Saw Cutter 1-7/8 In

The **Reed HDHS1875 Carbide-Tipped Hole Saw Cutter** is a premium, high-performance cutting tool designed for precision, durability, and versatility in both professional and DIY applications. Engineered with a **1-7/8-inch (45mm) diameter**, this hole saw is crafted to deliver clean, accurate cuts through a wide range of materials, including wood, drywall, plastic, and soft metals, making it an indispensable addition to any toolkit. The **carbide-tipped cutting edge** ensures exceptional hardness and wear resistance, significantly extending the tool s lifespan compared to standard high-speed steel (HSS) alternatives. This advanced material not only maintains its sharpness over extended use but also reduces the frequency of replacements, saving time and money in the long run.

The **HDHS1875** is built with a **heavy-duty, high-quality steel body**, providing structural integrity and stability during demanding cutting tasks. Its **center pilot bit** enhances accuracy by guiding the saw along the intended cut line, minimizing drift and ensuring a perfectly round hole every time. The **ergonomic design** of the shank allows for a secure fit in most drill chucks, while the **smooth, low-friction carbide coating** reduces heat buildup, preventing premature dulling and improving overall cutting efficiency. Whether you're installing cabinets, cutting holes for plumbing or electrical work, or fabricating custom projects, this hole saw delivers consistent, professional results with minimal effort.

What truly sets the **Reed HDHS1875** apart is its **versatility and reliability**. The carbide tip is ideal for cutting through dense materials like plywood, MDF, and even thin sheet metal without binding or overheating. The saw s **sharp, precision-ground teeth** ensure a clean exit, reducing the need for additional sanding or finishing work. Additionally, Reed s reputation for quality craftsmanship guarantees that this tool will perform under heavy-duty conditions without warping or losing its cutting edge. Whether you're a contractor tackling large-scale projects or a homeowner upgrading your workshop, the **HDHS1875** combines power, precision, and longevity to make every cut effortless and professional. Invest in this durable, high-performance hole saw and experience the difference of a tool built to last.

The **Reed HDHS1875 Carbide-Tipped Hole Saw Cutter (1-7/8")** is a popular choice for DIYers and professionals needing to cut large holes in wood, plastic, and thin metal. Below is a detailed breakdown of its pros and cons, followed by a conclusion and recommendation.

---

### **Pros**

1. **Durability and Longevity**

The carbide-tipped design ensures a longer lifespan compared to standard high-speed steel (HSS) hole saws. Carbide bits maintain their sharpness longer and resist wear, making them ideal for repeated use or cutting through tougher materials like treated wood or composite decking.

2. **Versatility**

- Softwoods (pine, cedar)

- Hardwoods (oak, maple)

- Medium-density fiberboard (MDF)

- Thin metals (up to 1/4" thick)

- Plastic and PVC pipes

The 1-7/8" size is useful for applications like electrical outlets, plumbing rough-ins, or installing vents.

3. **Smooth and Clean Cuts**

Carbide-tipped bits produce cleaner, more precise cuts with less chipping or splintering than standard steel bits. This is particularly noticeable in woodworking or when cutting near edges where aesthetics matter.

4. **Efficiency**

Carbide bits cut faster than HSS bits, reducing the time spent on each hole. This is beneficial for professionals or large projects where speed matters.

5. **Compatibility**

The hole saw is designed for standard drill chucks (1/2" or 3/8" depending on the drill), making it compatible with most power tools like drills, jigsaws, or reciprocating saws.

6. **Affordability**

Compared to high-end specialty hole saws, this Reed model offers a good balance of quality and cost. It s often priced lower than premium brands like Foredom or Milwaukee while still delivering reliable performance.

7. **Easy to Use**

The bit includes a pilot bit for centering, which helps prevent wandering and ensures a straight hole. The carbide tip also requires less pressure to operate, reducing user fatigue.

---

### **Cons**

1. **Limited Thickness for Metal**

While it can cut thin metals (up to 1/4"), it is **not suitable for thick or hard metals** (e.g., steel, aluminum sheets over 1/4" thick). For metalwork, a dedicated metal hole saw or a different approach (e.g., a hole saw with a cobalt or titanium coating) may be needed.

2. **Material-Specific Performance**

On extremely hard materials like dense hardwoods (e.g., walnut or mahogany) or reinforced composites, the carbide tip may still dull faster than expected. Frequent sharpening or replacement may be required.

3. **Dust and Clogging**

Like all hole saws, this bit can clog with dust or debris, especially when cutting dense materials. Regular cleaning or using a dust extraction system (e.g., a vacuum) is recommended to maintain performance.

4. **Not for Masonry or Concrete**

Carbide-tipped hole saws are **not designed for masonry, brick, or concrete**. For these materials, diamond-coated bits or specialized masonry hole saws are required.

5. **Potential for Bit Breakage**

While carbide is durable, improper use (e.g., excessive force, binding, or cutting at high speeds without coolant) can cause the bit to crack or break. Always follow the manufacturer s guidelines for speed and technique.

6. **Limited Availability of Replacements**

Reed is a well-known brand, but carbide-tipped hole saws may not be as widely stocked as standard HSS bits. If the bit wears out, finding a replacement might require ordering online.

---

### **Conclusion**

The **Reed HDHS1875 Carbide-Tipped Hole Saw (1-7/8")** is an excellent all-around tool for cutting holes in wood, plastic, and thin metal. Its carbide tip provides durability, clean cuts, and efficiency, making it a strong choice for DIYers, handymen, and light-duty professionals. However, its limitations such as not being suitable for thick metals or masonry mean it s not a universal solution. If your primary use involves woodworking or light metalwork, this bit is a reliable and cost-effective option. For heavier metal or masonry applications, a different tool would be necessary.

---

### **Recommendation**

- You frequently cut holes in wood, plastic, or thin metal.

- You want a durable, long-lasting bit that reduces the need for frequent replacements.

- You prioritize clean, precise cuts without excessive chipping.

- You re working on projects like electrical rough-ins, plumbing, or vent installation.

- You need to cut thick or hard metals (opt for a cobalt or titanium-coated metal hole saw instead).

- Your work involves masonry, brick, or concrete (use a diamond bit for these materials).

- You re on a tight budget and can find a comparable HSS hole saw at a lower cost (though the carbide tip s longevity may offset this).

**Final Verdict:** For most general-purpose hole-cutting tasks in wood and thin metal, the Reed HDHS1875 is a **highly recommended purchase**. Its balance of quality, performance, and affordability makes it a standout choice in its category. Pair it with a good drill and proper safety gear (e.g., goggles, gloves) for the best results.

Details:

Thicker walls, bigger carbides, and high-temperature brazing are the durable features that help withstand many cuts. Free Shipping on this item. Reed HDHS1875 Heavy Duty Carbide-Tipped Hole Saw Cutter 1-7/8 in: Fast Free Shipping. Heavy-duty hole cutters are the best choice for cutting cast iron and ductile pipe, including cement-lined.

SPECIFICATIONS: length : 2.625, width : 1.875, height : For use with Reed DM2100 Series Drilling Machines, Heavy-Duty Carbide-Tipped Hole Cutters provide more cuts into mains than standard hole cutters. Also suitable for cutting clay pipe using Reeds DM series Drilling Machines.: INCLUDES: 1 Carbide-Tipped Hole Cutter, FEATURES: Heavy duty hole cutters provide more cuts than standard model's. Recommended for cutting cast iron and ductile pipe, including cement-lined.

Full Factory Warranty. Thicker shell walls and bigger carbides allow these to stand many cuts. Model REED HDHS1875.

part #: hdhs1875 price

• $160.97

specifications sawbladeother:

• brand: Reed
• mpn: Hdhs1875
• type: Hole Saw
• upc: 757033043565

offer sawbladeother:

• quantity: 1
• options: Ship-to-home
• sold: 0
• availability: In Stock
• started: March 11, 2026

general sawbladeother:

• condition: New
• Power Tool Air Tool Accessories > Saw Blades > Other Saw Blades

shipping sawbladeother:

• class: Standard
• service: Standard
• transit: 2-6 Days
• cost: $0.00
• type: Fixed

payments sawbladeother:

• credit card: Diners-club
• other
• wallet: Paypal

seller sawbladeother:

• rating: 99.7%
• # reviews: 172486
• city: Las Vegas, Nevada

returns sawbladeother:

• method: Money back
• time: 30 Days
• policy: Returns Accepted
• paid by: Buyer

Reed HDHS1875 Is Similar To:

• Reed Bmhs14 7 8in Bi-metal Hole Saw 1-1 2in Cut Depth (44.4% similar) Free shipping on this item. Full factory warranty. Reed BMHS14 7/8IN bi-metal hole saw 1-1/2IN cut depth: fast free shipping. All of these hole saws feature a 1/1 /2 cut depth. Model Reed BMHS14. Bi-metal hole saws work well for steel and copper pipe. Hardened steel teeth. They fit both the DM3MECH ...(March 18th, 2026)