SUPERCUT G5111 Vp Bandsaw Blade 090101501117 64-1/2 .025 6-10

( Brand: Supercut ), ( Manufacturer Part Number: G5111 ), ( Type: Bandsaw Blades ), ( Country Of Origin: Us ), ( UPC: 090101501117 )

Review SUPERCUT 64-1/2 Inch 1/2 .025 6-10 Tpi Vp Bi metal Bandsaw Blade

The **Supercut G5111 64 " x " x " x 0.025" 6-10 VP Bi-Metal Bandsaw Blade** is a high-performance cutting tool engineered for precision, durability, and versatility in industrial and workshop applications. Designed with a **64 -inch overall length**, this blade delivers a generous cutting capacity, making it ideal for larger-scale projects such as metal fabrication, woodworking, and general machining where extended run times and reduced downtime are critical. The ** -inch wide kerf** provides a balanced compromise between material removal efficiency and structural integrity, ensuring smooth operation while minimizing waste. Meanwhile, the ** -inch thick back** enhances rigidity, reducing vibration and blade deflection during aggressive cuts, which is particularly beneficial when working with tougher materials like stainless steel, aluminum, or hardened alloys.

What truly sets this blade apart is its **bi-metal construction**, featuring a **6-10 VP (Variable Pitch) tooth configuration** optimized for both speed and cleanliness. The **0.025-inch thickness** strikes a practical balance between strength and flexibility, allowing the blade to navigate tight curves and complex contours without premature wear or breakage. The **bi-metal alloy combines a high-carbon steel cutting edge with a softer, more ductile back**, ensuring the teeth maintain their sharpness longer while the blade itself resists fatigue and deformation. This dual-material design not only extends the blade s lifespan but also reduces the frequency of sharpening, saving time and labor in high-volume production environments. The **variable pitch teeth** further enhance performance by reducing chatter and improving chip evacuation, resulting in smoother finishes and fewer interruptions during operation.

Built to withstand the demands of heavy-duty applications, this bandsaw blade is compatible with a wide range of materials, from soft woods and plastics to abrasive metals like cast iron and tool steel. Its robust construction minimizes the risk of stretching or warping, even under prolonged use, while the precise tooth geometry ensures consistent, accurate cuts with minimal burr formation. Whether used in a stationary bandsaw, a portable saw, or a specialized machining setup, the **Supercut G5111** delivers reliable performance, making it a staple for professionals who demand both precision and endurance. With its combination of length, width, and advanced bi-metal technology, this blade is an excellent investment for shops seeking a versatile, long-lasting solution for demanding cutting tasks.

**Pros and Cons of buying a Supercut G5111 64-1/2" 1/2" x 0.025" 6-10 VP Bi-Metal Bandsaw Blade**

1. **Versatility** The 6-10 VP (vibration per inch) pitch is suitable for a wide range of materials, including mild steel, stainless steel, aluminum, and some plastics. This makes it a good all-purpose blade for general metalworking tasks.

2. **Bi-Metal Construction** The blade combines a high-speed steel (HSS) tip with a carbon steel back, providing a balance of durability and edge retention. This construction helps reduce heat buildup and extends blade life compared to pure HSS or carbon steel blades.

3. **Thickness and Width** At 1/2" width and 0.025" thickness, this blade offers a good balance between cutting power and flexibility. It is thick enough to handle moderate stock but thin enough to navigate tighter bends in the saw frame.

4. **Length** The 64-1/2" length provides ample material for long cuts, reducing the need for frequent replacements, which can be cost-effective over time.

5. **Compatibility** The blade is designed for standard bandsaw setups, making it a straightforward replacement for many existing systems without requiring specialized adjustments.

6. **Durability** Bi-metal blades are generally more resistant to wear and deformation than single-metal blades, especially when cutting through tougher materials like stainless steel or hardened alloys.

7. **Cost-Effective for General Use** While not the cheapest blade on the market, its versatility and longevity make it a practical choice for hobbyists, small workshops, or light industrial use.

---

1. **Limited Specialization** If your primary work involves very soft materials (e.g., thin aluminum or non-ferrous metals) or very hard materials (e.g., tool steel or cast iron), a blade with a finer pitch (e.g., 8-12 VP) or a different tooth geometry (e.g., skip-tooth) might perform better. The 6-10 VP is a general-purpose pitch and may not optimize for specific applications.

2. **Potential for Clogging** When cutting materials that produce fine chips (e.g., aluminum or stainless steel), the teeth can clog more easily than with a finer-pitch blade. This may require more frequent cleaning or the use of a coolant to maintain smooth operation.

3. **Edge Retention Trade-Off** While bi-metal blades are durable, they may not retain an edge as long as premium HSS or carbide-tipped blades. For heavy-duty or continuous cutting, you may need to sharpen or replace the blade more frequently than with specialized alternatives.

4. **Flexibility Issues** At 0.025" thickness, the blade is relatively stiff and may struggle with very tight curves or intricate cuts in the saw frame. Thinner blades (e.g., 0.018" or 0.020") offer better flexibility for detailed work but are more prone to breakage.

5. **Noise and Vibration** Bi-metal blades can generate more noise and vibration compared to modern carbide or high-performance HSS blades, which may affect comfort during prolonged use.

6. **Not Ideal for Thin Stock** The 1/2" width and moderate thickness make this blade less suitable for cutting very thin materials (e.g., sheet metal under 1/8" thick) where a narrower or thinner blade would be more appropriate.

7. **Quality Variability** As with many budget or mid-range blades, the quality of tooth sharpening or material consistency can vary. Some users report uneven wear or premature dulling if the blade is not properly tensioned or maintained.

---

The Supercut G5111 64-1/2" 1/2" x 0.025" 6-10 VP bi-metal bandsaw blade is a solid, all-purpose choice for general metalworking tasks. Its versatility, durability, and balance of thickness and flexibility make it a practical option for hobbyists, small workshops, or light industrial use. However, it is not optimized for specialized applications like fine aluminum work, heavy-duty cutting, or intricate curves. If your primary use involves a wide range of materials and moderate cutting demands, this blade will likely meet your needs efficiently. For more specialized or heavy-duty applications, investing in a blade with a finer pitch, carbide tips, or a different tooth geometry may yield better results.

- **Buy this blade if:** You need a reliable, general-purpose blade for cutting mild steel, stainless steel, aluminum, or plastics in a bandsaw with moderate to light use. You prioritize durability and versatility over ultra-fine performance.

- **Consider alternatives if:** Your work involves frequent cutting of very soft metals (e.g., thin aluminum), very hard materials (e.g., tool steel), or intricate curves. In such cases, a finer-pitch blade (e.g., 8-12 VP), a carbide-tipped blade, or a thinner blade (e.g., 0.018") may be more suitable.

- **Maintenance Tip:** Always tension the blade correctly, use a coolant when cutting tough materials, and clean the teeth regularly to maximize its lifespan. Sharpen or replace the blade promptly when you notice reduced cutting efficiency.

Details:

Just match up the length in charts with recommended for your bandsaw. The ranker set is ideal for most contour cuts. Blade width : Measured from the back of blade to tip tooth the widest point. Speed, finish, etc.

Tooth Set: Two common tooth sets for wood bandsaw blades are alternate and ranker. Blade length : Measured by the blade circumference, lengths are specific to each bandsaw. Blade Selection: Selecting the right blade for cutting task requires knowledge about characteristics and priorities .e. Gauge: 0.025.

Blades are sized to fit Grizzly bandsaw as well many other brands. Ranker: Three teeth in a recurring group one bent left, right, and that is not. Type: Bi-Metal. Specifications: length : 64-1/2.

TPI: 6-10 VP. Alternate: An all-purpose arrangement where the teeth are bent evenly left and right of blade. Top quality saw steel manufactured to precise tolerances and guaranteed welds result in very smooth cutting blades. Hook or Claw: Wide gullet's round or flat, equally spaced teeth, positive rake angle, and fast cut with good surface finish.

Each type of tooth set removes material in a different manner, leaving cuts with characteristics. They are determined by the wheel diameter and distance between wheels. Tooth Type: The most common tooth types for wood blades are: Standard or Ranker: Equally spaced teeth set at a rake angle.

part #: g5111 prices

• $14.39-$15.39

specifications sawbladeother:

• brand: Supercut
• mpn: G5111
• type: Bandsaw Blades
• country of origin: Us
• upc: 090101501117

returns sawbladeother:

• time: 30 Days
• policy: Returns Accepted
• method: Money back
• paid by: Buyer

shipping sawbladeother:

• transit: 3-5 Days
• type: Fixed
• class: Standard
• service: Standard
• cost: $14.99

seller sawbladeother:

• rating: 99.6%
• city: Bellingham, WA
• # reviews: 19732

offer sawbladeother:

• availability: In Stock
• quantity: 5
• options: Ship-to-home
• started: March 20, 2026
• sold: 0

general sawbladeother:

• condition: New
• Power Tool Air Tool Accessories > Saw Blades > Other Saw Blades

payments sawbladeother:

• other
• credit card: Mastercard
• wallet: Paypal

Supercut G5111 Is Similar To:

• 6-35-02-148-02-9 Fein 1-3-4-inch Supercut Bi-metal (27.9% similar) Unused, ready to use. Excellent condition...(February 9th, 2018)
• -cut 63502136012 Supercut Fein 16 Blade 2-9 (32.5% similar) Shipping fast shipping. For six years in a row CPO commerce has been recognized by inc. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. 37 availability in stock shipping free shipping features flush cut configuration allows for cuts in door jambs...(December 27th, 2014)
• 1-1 Fein Blade 63502147015 Universal cut 8 Supercut (12.7% similar) CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. For six years in a row CPO commerce has been recognized by inc. Shipping fast shipping. 97 you save includes universal in. Magazine as one of the fastest growing private companies in America...(January 31st, 2015)
• 63502148013 Universal Blade Supercut 1-3 4 cut Fein (27% similar) CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. Magazine as one of the fastest growing private companies in America. Shipping fast shipping. For six years in a row CPO commerce has been recognized by inc. Includes universal in...(February 12th, 2015)
• Supercut 63903117015 Fein 5pk Straight Blade Cutter (37.4% similar) Magazine as one of the fastest growing private companies in America. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. For six years in a row CPO commerce has been recognized by inc. Shipping fast shipping...(January 23rd, 2015)
• Window Blade 2 63903155014 Pk Supercut Cutter Original Shipped Fein Free (19.4% similar) ...(December 6th, 2014)
• Scraper 63903206018 Supercut Fein Blade 2pk (29.1% similar) Shipping fast shipping. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. Magazine as one of the fastest growing private companies in America. 01 availability in stock shipping free shipping features designed to be used on the Supercut system for ...(January 7th, 2015)
• Fei-6-35-02-138-01-4 Fein Supercut Saw Blade 4014586252247 (26.2% similar) Feign 62 pack...(August 13th, 2018)
• 63502119010 Fein 1-3 8 Precision E-cut Supercut Blade New (21.7% similar) Includes in. Magazine as one of the fastest growing private companies in America. Shipping fast shipping. CPO will cover the cost of return shipping in the event that an incorrect or defective item was sent. For six years in a row CPO commerce has been recognized by inc...(January 14th, 2016)
• 0 90101 44224 3 Supercut Replacement Band Saw Blade Tpi 901014421990 (37.1% similar) Tpi teeth per inch: 6/1 0, blades qty. Bimodal variable tooth blade. 1, blade type bi-metal, size l x w in. Tpi teeth per inch 6/1 0, blades qty. The Supercut bi-metal replacement band saw blade measures 93IN. Product summary: the Supercut bimodal replacement band saw blade measures 93IN.: 1, blade ...(July 25th, 2021)
• Supercut 155845 Premium Band Saw Blade 93 Inch X 3 4 035 4-6 Vari Tooth Pattern New (34.6% similar) Bandsaw blade is brand new in sealed package, please see photos...(January 8th, 2025)