TIMBERLINE 175-60C Carbide Tipped Atb Deg Saw Blade 738685175637 7-1/4 60T 5/8

( Brand: Timberline ), ( Manufacturer Part Number: 175-60C ), ( Part Type: Blade Saw ), ( California Prop 65 Warning: Chemical Wood Dust ), ( UPC: 738685175637 )

Review TIMBERLINE Carbide Tipped 7-1/4 Inchx 60t Atb Deg 5/8 Bore Saw Blade

The **Timberline 175-60C Carbide-Tipped 7-1/4" 60-Tooth ATB 12 Saw Blade** is a premium cutting tool engineered for precision, durability, and versatility, making it an indispensable asset for both professional contractors and serious DIY enthusiasts. Designed with a **7-1/4-inch diameter**, this blade strikes an ideal balance between maneuverability and cutting capacity, allowing it to handle a wide range of materials from softwoods and plywood to medium-density hardwoods with remarkable efficiency. The **60-tooth configuration** delivers a fine kerf and optimal tooth spacing, ensuring cleaner cuts with reduced tear-out while maintaining a steady, controlled feed rate. This blade s **12-degree bevel angle** is optimized for smooth, accurate cuts, particularly in crosscuts and rips, minimizing splintering and maximizing material utilization.

What truly sets this blade apart is its **carbide-tipped teeth**, which are forged from high-grade tungsten carbide a material renowned for its exceptional hardness, wear resistance, and longevity. Unlike traditional high-speed steel (HSS) blades, carbide tips maintain their cutting edge far longer, even when tackling abrasive materials like treated lumber, composite decking, or painted surfaces, significantly extending the blade s lifespan and reducing downtime for sharpening or replacement. The **Alternate Top Bevel (ATB) tooth pattern** further enhances performance by promoting self-cleaning and chip evacuation, reducing clogging and improving cut quality across various wood types.

Built to withstand the demands of heavy-duty applications, this blade features a **high-quality, heat-treated steel body** that resists warping, bending, and fatigue, ensuring consistent performance even under prolonged use. The **60-degree hook set** on the teeth helps prevent binding and reduces friction, allowing the blade to glide through material with ease while maintaining a sharp, precise edge. Whether mounted on a table saw, radial arm saw, or miter saw, this blade excels in both production work and fine woodworking, offering a seamless blend of power and precision. Ideal for contractors, carpenters, and woodworkers who demand reliability and performance, the **Timberline 175-60C** is a standout choice for those seeking a blade that delivers professional-grade results with minimal maintenance.

### **Pros and Cons of buying a Timberline 175-60C Carbide-Tipped 7-1/4" 60T ATB 12 5/8" Saw Blade**

1. **Durability and Longevity** The carbide-tipped teeth are highly resistant to wear, making this blade suitable for heavy-duty cutting, including rough lumber, plywood, and even some metal or plastic. It will last significantly longer than standard high-speed steel (HSS) blades before needing replacement.

2. **Versatility** The 12 hook angle (ATB) is optimized for crosscutting and general-purpose cutting, making it useful for a wide range of applications, including ripping and crosscutting softwoods, hardwoods, and engineered wood products. The 60-tooth count provides a good balance between speed and smoothness for most table saw, miter saw, or radial arm saw setups.

3. **Precision and Finish** The 5/8" kerf (thickness) is standard for most table saws, reducing tear-out and improving cut quality compared to wider-kerf blades. The carbide tips help maintain sharpness, leading to cleaner cuts with less splintering.

4. **Cost-Effectiveness Over Time** While the upfront cost is higher than basic HSS blades, the extended lifespan and consistent performance make it a cost-effective choice for frequent users, especially in professional or high-volume settings.

5. **Compatibility** The 7-1/4" diameter fits most standard table saws, miter saws, and radial arm saws without requiring special arbor adjustments. The 5/8" width is universally compatible with most saws that use standard blades.

6. **Reduced Downtime** Carbide blades stay sharper longer, reducing the need for frequent sharpening or replacement, which saves time and labor in workshops or production environments.

7. **Safety** A well-maintained carbide blade with a proper hook angle reduces the risk of kickback by maintaining a cleaner, more controlled cut.

---

1. **Higher Initial Cost** Carbide-tipped blades are more expensive upfront compared to standard HSS blades. For occasional users or those working with softer materials, this may not be justified.

2. **Specialized Maintenance** While carbide blades are low-maintenance, they require proper storage (to avoid damage) and occasional cleaning to prevent debris buildup in the teeth. Improper handling can lead to chipping or premature wear.

3. **Not Ideal for All Materials** While carbide handles most woods and some plastics, it is not designed for heavy-duty metal cutting (which requires a dedicated metal-cutting blade). For non-ferrous metals or thin gauge materials, a specialized blade would be better.

4. **Potential for Dulling Over Time** Although carbide is durable, the tips can still wear down with extreme use (e.g., cutting abrasive materials like treated lumber or hard plastics). Eventually, the blade will need replacement, though this happens much less frequently than with HSS.

5. **Limited Availability for Specialized Cuts** If you frequently perform fine woodworking or require very fine kerf blades (e.g., for joinery), a specialized blade (such as a zero-clearance or fine-tooth blade) may be more appropriate. This blade is best suited for general-purpose work.

6. **Weight** Carbide blades are heavier than HSS blades due to the added material. This can contribute to fatigue during prolonged use, though the difference is usually negligible for most users.

7. **Potential for Kickback if Misused** Like all blades, improper use (e.g., cutting without a riving knife or push stick, or feeding material incorrectly) can lead to kickback. However, this is more about operator technique than the blade itself.

---

The **Timberline 175-60C 7-1/4" 60T ATB 12 5/8" carbide-tipped blade** is an excellent all-around choice for users who prioritize durability, precision, and longevity. It excels in general woodworking tasks, including crosscutting, ripping, and cutting plywood or engineered wood, while requiring less frequent replacement than HSS blades. The trade-off is a higher upfront cost, but for frequent users especially professionals or serious hobbyists the investment pays off in reduced downtime and consistent performance.

If you primarily work with softwoods, plywood, or require a blade that stays sharp for heavy use, this is a strong recommendation. However, if you only cut occasionally or work mostly with very soft materials (e.g., particleboard), a cheaper HSS blade might suffice. For specialized tasks (e.g., fine joinery or metal cutting), a different blade would be more appropriate.

- You frequently cut a variety of woods (softwoods, hardwoods, plywood).

- You want a blade that stays sharp for thousands of cuts with minimal maintenance.

- You re looking for a balance between speed and smooth finish.

- You use a table saw, miter saw, or radial arm saw regularly.

- You only cut occasionally or work with very soft, low-density materials.

- You re on a tight budget and can t justify the higher upfront cost.

- You frequently cut metals or require ultra-fine kerf blades for specialized woodworking.

For most general woodworking applications, this is a **highly recommended purchase** due to its reliability and performance.

Details:

Designed for the contractors and Do-It-Yourselves. All blades fit: Portable 7-1/4 Electric Worm Drive circular saws, Black Decker, Bosch, Dealt, Hitachi, Epson, Akita, Milwaukee, Porter-Cable, Ry obi and Skill. CNC Router Bits. Planer Joiner Knives.

Boring Drilling Bits. Very Durable. Popular all-purpose diamond knockout saw blades used for ripping and cross cutting wood framing, decking plywood. Carbide-Tipped.

Safety Guidelines for Saw Blades. PRODUCT SPECIFICATIONS Diameter: 7-1/4. Sharper Cutters. Avoid inhaling wood dust or use a mask other safeguards for personal protection.

part #: 17560c price

• $24.19

specifications sawbladeother:

• brand: Timberline
• mpn: 175-60c
• part type: Blade Saw
• california prop 65 warning: Chemical Wood Dust
• upc: 738685175637

seller sawbladeother:

• rating: 98.7%
• # reviews: 390
• city: Cedarhurst, New York

payments sawbladeother:

• wallet: Apple-pay
• other
• credit card: Mastercard

offer sawbladeother:

• sold: 0
• started: March 24, 2026
• options: Ship-to-home
• availability: In Stock
• quantity: 2

shipping sawbladeother:

• class: Standard
• type: Calculated
• transit: 2-6 Days
• carrier: UPS
• cost: $16.72
• service: UPS Ground

general sawbladeother:

• condition: New
• Power Tool Air Tool Accessories > Saw Blades > Other Saw Blades

returns sawbladeother:

• time: 30 Days
• policy: Returns Accepted
• paid by: Buyer
• method: Money back

Timberline 175-60C Is Similar To:

• Timberline 12096-30 Ti-cut Non-ferrous Aluminum 12 X 96t Tcg 30mm Ct Saw Blade (47.5% similar) Product specifications diameter: 12. Planer joiner knives. Safety guidelines for saw blades. Boring drilling bits. Carbide tipped ti-cut aluminum non-ferrous cutting saw blades specially designed carbide and blade geometry for cutting relatively thin-walled aluminum, aluminium composite materials ...(September 29th, 2025)
• Timberline 185-505 7-1 4 50t Tcg 5 8 Bore Non Ferrous Blade (59.6% similar) Part #: Timberline 185-505 for sale...(November 28th, 2025)